POE Combiner Splitter Adapter Kit,Outdoor Waterproof Power Over Ethernet Cable 3-Way RJ45 Network Camera Converter Kit for POE Switches Synthesized Splits,IP Camera,Internet Phone(2-Sets)

1、Ever installed a camera in a location, only to find out a few days later that you need another camera right by it? What's worse, the switch is on the other side of the building and it took you hours to run that one long cable run. No worries! Just use this POE combiner splitter adapter kit to make your installation much easier and avoid running another long cable.2、Our poe combiner splitter adapter kit can transfer 2 network devices using one Ethernet cable. Save on wiring costs. Suitable for network monitoring systems, network integrated wiring. It is worth noting that this product can only be used for network transmission within 130M. Gigabit transmission is not supported.Specification:Compliant Protocol: IEEE802.3afPower Supply Mode: Compatible with both mode A (end jumper method) and mode B (middle jumper method).Ethernet Communication Interface: RJ45Data Transfer Rate: 10/100MbpsTransmission Medium: CAT5 / CAT 5e / CAT6 Standard Network CableTransmission Distance: Approx 50 metersPackage Include:2 x PoE Combiner2 x PoE Splitter6 x Waterproof CapNote:1. Only the RJ45 cable with simple crystal head can pass through the waterproof screw cap, the sheathed RJ45 would not pass.2. This priduct support POE device transmission, but can not replace POE function. You cannot convert a normal device to a POE device by using this device.3. Support simultaneous networking of two cameras.4. Works with most PoE switches and PoE cameras.

• Product Description: Our POE splitter has a data transfer rate of 100/100Mbps, a DC jack size of 0.22*0.08 inches, and is fully compliant with IEEE 802.3af. Compatible cameras must be POE-enabled and use POE devices with 12+, 36- transmission standards. It is worth noting that this product can only be used for network transmission within 130M. (Gigabit transmission and 45+, 78- transmission standards not supported)
• Waterproof for Outdoor Use: Our POE splitter network cabling connector unit comes with 6 sets of weatherproof RJ45 connectors.Full exposure to the elements gives your splitter unit the ultimate in weatherproof protection.
• Best Choice：When you want to expand your existing surveillance equipment or purchase multiple cameras at one time, you only need to run 1 wire instead of 2 wires back to the switch or NVR, which is very effective for both new and existing installations. This PoE Combiner/Mux kit will save you time and material costs.
• Easy to Use：Plug the combiner into 2 open ports of a POE switch or POE NVR, then lay a long cable to a nearby camera location and plug it into the splitter, connect 2 short cables to the splitter, and finally connect the other end to the camera and you're done. Installation is very simple, plug and play without any soldering.
• Package Including：2 x PoE Combiner, 2 x PoE Splitter, 6 x Waterproof Cap.